Phased Array Ultrasonic Testing (PAUT)
High-resolution defect detection and sizing in welds and components with multi-angle beam steering.
FAHAD ALOTAIBI Est. · ﻣﺆﺳﺴﺔ ﻓﻬﺪ اﻟﻌﺘﻴﺒﻲ
Inspection Services
Manual and automated ultrasonic scanning systems including Phased Array (PAUT), Time of Flight Diffraction (ToFD), A-Scan, and Guided Wave. Digital and computed radiography with X-Ray or Gamma techniques, deployable via battery-operated crawlers. Corrosion mapping (A/B/C-Scan), wall thickness surveys, tank floor inspection, composite wrapping, PMI (XRF/OES/LIBS), hardness surveys, visual and surface crack detection, and custom systems tailored to your needs.
Time of Flight Diffraction (ToFD)
Accurate through-wall sizing of planar flaws; excellent for weld inspections and corrosion-affected areas.
Guided Wave Ultrasonic
Long-range screening of pipelines from limited access points to locate corrosion and features remotely.
A-Scan & B/C-Scan UT
Point and mapped thickness measurements; corrosion mapping for baseline and trending.
Digital & Computed Radiography
X-Ray or Gamma radiography, including close-proximity systems and self-propelled crawler deployment.
Corrosion Mapping & Wall Thickness
A/B/C-Scan mapping, tank floor inspection and mapping, trend analysis for life-extension.
MFL Tank Floor Testing
Magnetic Flux Leakage screening for rapid identification of corrosion and pitting in tank floors.
IRIS – Internal Rotary Inspection
Tube inspection with rotary ultrasonic immersion for precise wall thickness profiling.
RET – Remote Field Tube Testing
Remote field eddy-current method for ferromagnetic tube integrity assessment.
ECA – Eddy Current Array
Fast, high-coverage surface inspection for cracks, corrosion, and material variations.
QSR – Quantitative Short-Range
Short-range UT for under-insulation corrosion and areas near supports or nozzles.
3D Laser Scanning
High-density point clouds for as-built capture, clash checks, and model verification.
PMI & Hardness Testing
Positive Material Identification (XRF/OES/LIBS), hardness surveys, and metallographic replication.
Magnetic Particle & Dye Penetrant
Surface and near-surface crack detection for ferromagnetic and non-porous materials.
Welding Qualification (WPS/PQR)
Procedure and welder qualifications with full QA/QC documentation support.
QA/QC Inspection Services
Independent inspection, document control, and compliance verification across project phases.
Need a bespoke inspection plan or turnaround support?
Talk to an Expert
FAHAD ALOTAIBI Est. · ﻣﺆﺳﺴﺔ ﻓﻬﺪ اﻟﻌﺘﻴﺒﻲ
Inspection Services
Manual and automated ultrasonic scanning systems including Phased Array (PAUT), Time of Flight Diffraction (ToFD), A-Scan, and Guided Wave. Digital and computed radiography with X-Ray or Gamma techniques, deployable via battery-operated crawlers. Corrosion mapping (A/B/C-Scan), wall thickness surveys, tank floor inspection, composite wrapping, PMI (XRF/OES/LIBS), hardness surveys, visual and surface crack detection, and custom systems tailored to your needs.
Phased Array Ultrasonic Testing (PAUT)
High-resolution defect detection and sizing in welds and components with multi-angle beam steering.
Time of Flight Diffraction (ToFD)
Accurate through-wall sizing of planar flaws; excellent for weld inspections and corrosion-affected areas.
Guided Wave Ultrasonic
Long-range screening of pipelines from limited access points to locate corrosion and features remotely.
A-Scan & B/C-Scan UT
Point and mapped thickness measurements; corrosion mapping for baseline and trending.
Digital & Computed Radiography
X-Ray or Gamma radiography, including close-proximity systems and self-propelled crawler deployment.
Corrosion Mapping & Wall Thickness
A/B/C-Scan mapping, tank floor inspection and mapping, trend analysis for life-extension.
MFL Tank Floor Testing
Magnetic Flux Leakage screening for rapid identification of corrosion and pitting in tank floors.
IRIS – Internal Rotary Inspection
Tube inspection with rotary ultrasonic immersion for precise wall thickness profiling.
RET – Remote Field Tube Testing
Remote field eddy-current method for ferromagnetic tube integrity assessment.
ECA – Eddy Current Array
Fast, high-coverage surface inspection for cracks, corrosion, and material variations.
QSR – Quantitative Short-Range
Short-range UT for under-insulation corrosion and areas near supports or nozzles.
3D Laser Scanning
High-density point clouds for as-built capture, clash checks, and model verification.
PMI & Hardness Testing
Positive Material Identification (XRF/OES/LIBS), hardness surveys, and metallographic replication.
Magnetic Particle & Dye Penetrant
Surface and near-surface crack detection for ferromagnetic and non-porous materials.
Welding Qualification (WPS/PQR)
Procedure and welder qualifications with full QA/QC documentation support.
QA/QC Inspection Services
Independent inspection, document control, and compliance verification across project phases.
Need a bespoke inspection plan or turnaround support?
Talk to an Expert